Description
Dimensions Table
| Model | Ball-screw Diameter | Pitch | Ball Diameter | Flange type | Number of Circuits | Ball screw nut mounting dimensions | Load (KN) | SKU | ||||||||||
| D1 (g6) | D2 0-0.015 | D3 | D4 | D5 | L1 | L2 | B | G | H1 | Ca | Coa | |||||||
| SFU 1605 | 16 | 5 | 3.175 | d<32 | 3 | 28 | 27.8 | 48 | 38 | 5.5 | 46 | 10 | 10 | M6 | 40 | 7.65 | 13.20 | 1035001 |
| SFU 1610 | 16 | 10 | 2.778 | d<32 | 2 | 28 | 27.8 | 48 | 38 | 5.5 | 44 | 10 | 10 | M6 | 40 | 7.36 | 12.75 | 1035002 |
| SFU 2005 | 20 | 5 | 3.175 | d<32 | 3 | 36 | 35.8 | 58 | 47 | 6.7 | 51 | 10 | 10 | M6 | 44 | 8.60 | 17.10 | 1035003 |
| SFU 2010 | 20 | 10 | 3.175 | d<32 | 3 | 36 | 35.8 | 58 | 47 | 6.7 | 52 | 10 | 10 | M5 | 40 | 8.35 | 16.80 | 1035006 |
| SFU 2505 | 25 | 5 | 3.175 | d<32 | 3 | 40 | 39.5 | 62 | 51 | 6.6 | 51 | 10 | 10 | M6 | 48 | 9.80 | 23.00 | 1035004 |
| SFU 2510 | 25 | 10 | 4.763 | d<32 | 3 | 40 | 39.5 | 62 | 51 | 6.8 | 80 | 16 | 15 | M6 | 48 | 8.70 | 20.50 | 1035005 |
| Pictures, dimensions,table data and technical drawings of this product are made with reasonable care and liability is excluded for the accuracy and correctness of this data. | ||||||||||||||||||
Dimensions for SFU 1204 Nut
Ball Screw & Stepper Motor Calculator
Use the calculator to match ball screw lead and speed with stepper motor torque, current, voltage and step resolution for your CNC axis.
Description
There are many benefits in using ballscrews, such as high efficiency and reversibility, backlash elimination, high stiffness, high lead accuracy, and many other advantages. Compared with the contact thread lead screws as shown in (above), a ballscrew adds balls between the nut and spindle. The sliding friction of the conventional screw is thus replaced by the rolling motion of the balls.
High efficiency and reversibility
Ballscrews can reach an efficiency as high as 90% because of the rolling contact between the screw and the nut. Therefore, the torque requirement is approximately one third of that of conventional screws. It can be seen from Fig.(above) that the mechanical efficiency of ball screws are much higher than conventional lead screws. Ballscrews have super surface finish in the ball tracks which reduce the contact friction between the balls and the ball tracks. Through even contact and the rolling motion of the balls in the ball tracks, a low friction force is achieved and the efficiency of the ballscrew is increased. High efficiency renders low drive torque during ballscrew motion. Hence, less drive motor power is needed in operation resulting in lower operation cost.