DDCS CNC Controllers

DDCS V4.1

The DDCS V4.1 3~4 axes motion controller for stepper and servo system, is updated from DDCS V3.1 on software and hardware.

Please note that this controller requires two 24v power supplies (minimum 0.5A). This controller comes in a 3-axis or 4-axis option.

DDCS V4.1 the new features comparing with DDCS V3.1

1. Can transfer the files by Ethernet communication between the computer and DDCS V4.1 controller.
2. Slave X, Slave Y Or Slave Z, for Gantry machine with two independent motors on the main axes.
3. Servo Spindle can be connected to PUL/DIR output when selected;
4. We add Polar coordinate programming commands and Rotation commands, and completed Radius compensation commands on DDCS V4.1 controller.
5. DDCS V4.1 controller upgrades the motion algorithm, by Machining profile accuracy configuration, makes a long g-code program with short line segments running smoother.
6. No matter how big program file it is, system can quickly active the function of Start from Specified line and Start from closest point in few seconds.
7. Improve the simulation function. During the simulation, you can adjust the FRO and observe whether the programming path meets the expectations and check the soft limits. During the simulation, it can be paused, and when press the Start key again, the system will continue to simulate from the pause breakpoint.
8. DDCS V4.1 added driver alarm input ports, and can configurate the ports No.as you want.Same as DDCS-Expert.
9. We add cycle encoder for A axis, which is good for unlimited rotation for A axis.
10. Added the window for analysis prompt.
11. Support International coding, almost support all language, the users can add his language for the control system.
12. Increased the Parameters about the acceleration when Estop, to avoid collision by Stop when Estop the machine in high speed, edit the related parameters and system can give a smooth stop, this means there is no position loss.
13. System FPGE cited 32 -bit speed generator, with higher resolution for the speed / acceleration, it means higher positioning accuracy.
14. Screen size: 7 inch.

Manual DDCS V41 User’s manual in English V1 (20230109)

DDCS V3.1

Main parameter

1. 16 photoelectric isolated digital inputs,3 photoelectric isolated digital outputs;
2. 3.1 Version enhanced Algorithm,support soft interpolation,fixed arc interpolation bug of the old version;
3. Analog spindle control 0-10V spindle control (can be modified as PWM output);
4. 3-4 axes motor Control.Differential Pulse and direction output signal,Max.500Khz per axis;
5. ARM9 main control chip,FPGA core algorithm chip;
6. 5 inches TFT screen, resolution ratio: 480×272,17 operation keys;
7. The Power Supply for the controller is 24VDC, minimum Current is 0.5A;
8. The Power Supply for IO Port is 24VDC,minimum current is 0.5A;By the IO power supply,system already supply the power for IO ports.So no need the external power supply for IO port anymore;
9. USB flash disk support for G code file input,no size limited of the G-code file ;1GB internal memory for G-code file storage;
10. Support standard MPG;
11. Jog function for each axis (continuous, step, defined distance);Customer can define the distance;
12. Support the operation of quickly specify the running position;
13. Support for“ Power Cut” recovery. Data is automatically saved;
14. Backlash compensation, Tool compensation
15. Control System Unit is compatible with Metric Units and Imperial Units;
16. MPG and extended Keyboard can also control and edit the controller system；
17. Add new function of “Try cutting”(handwheel guiding) and “Single-stage processing mode” ;
18. 3 kinds Probing Modes:Fixed Position of tool sensor,Floating Position of the tool sensor,Rectangular block Sensor;
19. Enhanced the software,added a lot of parameters,Optimal Design and algorithm,makes the new version more strong functions and steady;
20. The Option Language of the system is Chinese/English/Russian.
21. Version 3.1 cited the new circuit design and metal box,which can avoid the noise a lot.

Manual DDCS V31 MANUAL V3

Standard order kit DDCS V4.1
SKU: 1228004

Standard order kit DDCS V3.1
SKU: 1228001

MPG for DDCS V3.1 / DDCS V4.1
SKU: 1228007

MPG to DDCS V4.1
DDCS MPG Pendant: SKU 1228007

MPG to DDCS V3.1
DDCS MPG Pendant: SKU 1228007

DDCS V3.1

DDCS V4.1