FNIRSI Digital Oscilloscope DSO-TC3

DSO-TC3 combines a digital oscilloscope, electronic component tester, signal generator, continuity test, voltage test, temperature and humidity measurement, infrared decoding and other functions are skillfully integrated. It is equipped with a 2.4″ color TFT display and a built-in rechargeable lithium battery for mobile use.

Price without tax:

62.90 

Related Products
No image set

Description

  Details

FNIRSI DSO-TC3 combines a digital oscilloscope, electronic component tester, signal generator, continuity test, voltage test, temperature and humidity measurement, infrared decoding, and other functions that are skillfully integrated. It is equipped with a 2.4-inch color TFT display, and a built-in rechargeable lithium battery, bringing users stronger and more practical functions with good portability.

DSO-TC3 Oscilloscope – 3-in-1 Handheld Oscilloscope & DDS Signal Generator & Transistor Tester, 500Khz Bandwidth 10MSa/s Sampling Rate, 6 Types of Waveforms, Transistors Measure

DSO-TC3 handheld oscilloscope has a real-time sampling rate of 10MS/s and a 500kHz bandwidth. With complete trigger function (Single, Normal, Automatic), it can be used freely for both periodic analog signals and aperiodic digital signals.Equipped with efficient one-key AUTO, the measured waveform can be displayed without cumbersome adjustment.

DSO-TC3 transistor tester is especially suitable for fast pairing of transistors, identification of mixed surface mount and wordless components, and preliminary screening of small batch components.”Mos Test” mode can test various types of transistors, and can identify device type, pin polarity, hFE, turn-on voltage, junction capacitance, can test capacitance, resistance, inductance components, etc.

DSO-TC3 transistor tester can automatically identify and measure various transistors, including NPN and PNP transistors, N-channel and P-channel field effect transistors, junction field effect transistors, diodes, dual diodes, thyristors, and resistors, inductors, capacitors and other passive components. Automatic detection of pin definition. Automatically analyze NEC protocol infrared code.

Other functional modes: Including circuit continuity test, 0~40V input voltage measurement, PWM output, 0~32V regulated diode measurement, DS18B20 temperature sensor measurement, DHT11 temperature and humidity sensor measurement. Six waveforms: sine, square, pulse stroke, triangle, ramp and DC.


  Features

Features:

  • Display: 2.4 inches TFT color screen
  • Battery: Built-in 1500mah rechargeable lithium battery (included)
  • Charging interface: USB Type-C, +5V
  • Digital Oscilloscope: 10MSa/s
  • Real-time sample rate: 500Khz
  • Analog Bandwidth: 1ΜΩ
  • Input resistance: Alternating Current / Direct Current
  • Coupling method: 400V
  • Test voltage ranges: 10mV-10V
  • Vertical Sensitivity (x1): 1us-10s

 

Horizontal time base ranges:

  • Trigger mode: Auto / Normal / Single
  • Trigger type: Rising edges / Falling edges
  • Waveform Freeze: Yes
  • Automatic measurement: Yes

Transistor Tester:

  • Capacitor: 25pF~100mF
  • Resistor: 0.01Ω ~ 50ΜΩ
  • Inductor: 10uH~1000uH
  • Battery: 0.1~4.5V
  • Input voltage: 0~40V
  • DS18B20: 0-85℃
  • DHT1: 0-60°C/5-95%

 

Signal Generator:

  • Sinewave: 1-10 KHz / 0-3.3V/50%
  • Square wave: 1-100 KHz / 3.3V/50%
  • Pulsewave: 1-100 KHz / 3.3V/0-100%
  • Triangle wave: 1-10 KHz / 0-3.3V/50%
  • Ramp: 1-10KHz /0-3.3V/0-100%
  • Direct current: 0-3.3V

 


  Package list

 

Content of the package kit:

 

    1. DSO-TC3 * 1 pcs
    2. P6100 High Voltage Probe * 1 pcs
    3. Adapter * 1 pcs
    4. Ordinary Probe * 1 pcs
    5. Test Hook * 3 pcs
    6. Packing Box * 1 pcs
    7. Manual * 1 pcs
    8. Type-C Charging Cable * 1 pcs

 

 

 

FNIRSI-Digital-Oscilloscope-DSO-TC3


  Features

Automatically identify and measure various transistors,including NPN and PNP triode, N-channel and P-channel
mosfet, JFET, diodes, double diodes, thyristors, as well as resistors, inductors, capacitors, etc. passive components.
Automatic detection of pin definitions.

Real-time sampling rate TOMS/s, bandwidth 500 Khz Maximum measurement of 400V voltage signal
With complete trigger function (automatic, single, regular) Equipped with an efficient key AUTO, the measured
waveform can be displayed without cumbersome adjustments.

The signal generator has a total of 6 waveforms to choose from, with adjustable frequency and amplitude

Automatic detection of pin definition. Automatically analyze NEC protocol infrared code.Other functional modes: Including circuit continuity test,
0~40V input voltage measurement, PWM output,0~32V regulated diode measurement, DS18B20 temperature sensor measurement, DHT11
temperature and humidity sensor measurement, etc.

Display: 2.4 inches TFT color screen
Supply voltage: Built-in 1500mah rechargeable lithium battery
Charging Specifications: USB Type-C, +5V

 

  Video examples from YouTube

 

 

 

 

 

 

 

 

Ask a question

FNIRSI Digital Oscilloscope DSO-TC3

DSO-TC3 combines a digital oscilloscope, electronic component tester, signal generator, continuity test, voltage test, temperature and humidity measurement, infrared decoding and other functions are skillfully integrated. It is equipped with a 2.4" color TFT display and a built-in rechargeable lithium battery for mobile use.