GDL60-30-24Z 6kw

High-speed ATC Spindle with automatic tool change (air cooled) 6.0kw, high power, high torque, low vibration. Accuracy of assembly and high quality of balancing provide the minimum beating on the shaft which is necessary for high-quality processing by the thin or long tool. Reliability of a spindle is provided by high quality bearings. Spindle control is carried out using a frequency converter (inverter).

Price without tax:

1,890.00 

Related Products

Description

  Details


ItemsGDL60-30-24ZImage
Power [kW]6.0            GDL60 24Z 6 g
Voltage [V]380
Current [A]12.5
Torque2.38 Nm
Speed [RPM/min]12000~24000
Frequency [Hz]800
Tool HolderISO30 (ER32 Collet)
Number of Poles4
Number of Phases3
Cooling TypeAir Cooling
Air Presseure for ATC [Bar]6
Bearings2*7008C 2*7006C
Weight [kg]19.0
Price without VAT 1890.00 €

Pictures, dimensions,table data and technical drawings of this product are made with reasonable care and liability is excluded for the accuracy and correctness of this data


  Description

High-speed ATC spindle with automatic tool change (air cooled) 6.0kw, high power, high torque, low vibration. Accuracy of assembly and high quality of balancing provide the minimum beating on the shaft which is necessary for high-quality processing by the thin or long tool. Reliability of a spindle is provided by high quality bearings. Spindle control is carried out using a frequency converter (Inverter). A feature of the spindle with an automatic tool change is not only the change of rotational speed, but also the possibility of changing the cutting tool during the work process. The spindle can provide rotation in the speed ranges that are provided by the cutting conditions or CNC controller of one or another machining tool. Spindle with automatic tool change is widely used in various industries: metalworking, woodworking, art wood carving, furniture manufacturing, manufacture of press molds, metal molds for casting, etc.


 Power and Signal wiring


GDL60 30 24Z connectors x


PinSignal Connection [2]Signal Connection PinsPinPower Connection [1] Power Connection Pins
1Sensor S2 (tool ejection) output (PNP NO normally opened)GDL60 24Z 6 signal pins11U2 connecting to phase U of frequency converterGDL60 24Z 6 power pins1
2Sensor S1 (tool locking) output (PNP NO normally opened)2V2 connecting to phase V of frequency converter
3 Not used3W2 connecting to phase W of frequency converter
4+24V DC power supply to S1 and S24Connected to the ground wire according to the identification
5+0V power supply for S1, S2 and button light 
6Signal output +24V of Pin C for button switch 
724V DC 0.75A DC cooling fan (red line) 
80V DC 0.75A DC cooling fan (black line) 

Pictures, dimensions,table data and technical drawings of this product are made with reasonable care and liability is excluded for the accuracy and correctness of this data


Warning: The 24V DC fan must be normally opened. The power supply and fan polarity must be correctly connected.


  Air Distribution

GDL60 30 24Z air


  1. The main solenoid valve links with the main switch of machine tool, and the ventilation shall be The main solenoid valve links with the main switch of machine tool, and the ventilation shall be carried out once the machine tool is started.
  2. The normally open air circuit of the dual-position five-way single electronically controlled solenoid valve is connected to the air seal, and the normally close air circuit is connected to the tool-changing. When the motorized spindle completely stops, the power-on normally close air circuit of the tool-changing solenoid valve is connected to the cylinder for the tool-changing, the cylinder is actuated to complete the tool changing while completing the tool-changing and dust removal. At this time, the air seal is closed. After the new tool handle enters the tapered hole of the spindle, the tool-changing solenoid valve is powered off to cut off the air inlet, and then air pipe is connected to the atmosphere. At this time, the air circuit is ventilated, the cylinder resets the spindle to lock the new tool handle, and the tool-changing operation is completed.
  3. The tool-changing pressure shall be stable. Otherwise, it is easy to cause that the tool-changing signal is in stable.
  4. The button switch is directly used to control the dual-position five-way single electronically controlled solenoid valve for the manual tool-changing.
  5. The proximity switch, tool-removal solenoid valve and the tool magazine work with the control system for the automatic tool-changing.
  6. The manual or automatic tool-changing can be carried out only when the motorized spindle stops completely. The manual or automatic tool-changing will be invalid when the motorized spindle rotates.

 

 

{tab Dimension}

   Dimension


GDL60 30 24Z drawing


 

 

 

 Downloads


 

Wiring signals and power pins Download here

Dimensions drawings Download here

Power torque curve Download here

 

Ask a question

GDL60-30-24Z 6kw

High-speed ATC Spindle with automatic tool change (air cooled) 6.0kw, high power, high torque, low vibration. Accuracy of assembly and high quality of balancing provide the minimum beating on the shaft which is necessary for high-quality processing by the thin or long tool. Reliability of a spindle is provided by high quality bearings. Spindle control is carried out using a frequency converter (inverter).