PWM controller for DC motors, HHO generators, LED dimmer and other where PWM modulation can be applied. All PWM controllers in this group have LED display except PWM-DCC-20-60, potentiometer and direction switch CW/CCW + neutral position.
Price without tax:6.92 €–10.91 €Price range: 6.92 € through 10.91 €
PWM controller for DC motors, HHO generators, LED dimmer and other where PWM modulation can be applied. All PWM controllers in this group have LED display except PWM-DCC-20-60, potentiometer and direction switch + neutral position.
Please dont change direction while the engine is at high speed due to reversible voltage! ! !
Model
Voltage [V]
Output Current [A]
SKU
Price [without VAT]
PWM-DCC-10-60
6 ∼ 60
10
1124001
5.60 €
PWM-DCC-20-60
9 ∼ 60
20
1124002
5.20 €
PWM-DCC-40-55
10 ∼ 55
40
1124003
8.20 €
Pictures, dimensions,table data and technical drawings of this product are made with reasonable care and liability is excluded for the accuracy and correctness of this data.
PWM-DCC-10-60 Technical Details
Input Voltage: 6V–55V DC
Output Voltage: Load-dependent (linear under load)
Output Current (Max): 10A
Continuous Current: 8A
Speed Adjustment Range: 0%–100%
Control Frequency: 15 kHz
Control Method: Potentiometer with switch
Regulation Type: Current adjustment
Rotation Direction: Supports forward and reverse; non-locking switch – motor stops when released
Digital Display: 0–100 (indicates percentage of full speed, not actual motor RPM)
Compatible Motor Type: Brushed DC motors
Wiring Type: Screw terminal block
Board Dimensions: 60 × 60 × 28 mm
Net Product Weight: 73 g
Note: The digital display shows a value from 0 to 100, representing the percentage of the motor’s full speed, not the actual RPM.
Warning: The input voltage must match the rated voltage of the motor. Do not connect to 220V AC. Input polarity must be observed (positive and negative must be correctly wired).
Wiring
OUT / To DC motor +/-
OUT / To DC motor +/-
IN / Power supply GND
IN / Power supply 6VDC – 60VDC
PWM-DCC-20-60 Technical Details
Power supply: 9VDC – 60VDC (up to 55VDC recommended)
Output voltage: Linear output voltage
Output Current: 20A ( 18A in Continuity )
Speed setting range: 0% to 100%
PWM frequency output: 15KHz
Speed control: via potentiometer
Power: 1200W
Printed Dimensions: 52mm * 92mm * 36mm
Wiring
OUT / To DC motor +/-
OUT / To DC motor +/-
IN / Power supply 6VDC – 60VDC
IN / Power supply GND
PWM-DCC-40-55 Technical Details
Input Voltage: 10V–55V
Output Voltage: Linear under load
Maximum Output Current: 60A
Continuous Current: 40A
Speed Adjustment Range: 0% – 100%
Control Frequency: 15 kHz
Speed Control Method: Potentiometer (with switch)
Control Type: Current regulation
Forward/Reverse Rotation: Supported
Digital Display Range: 0–100 (as a percentage of full speed)
Main Board Dimensions: 110 mm × 78 mm × 38 mm
Net Weight: 260 g
Note:
The digital display only shows values from 0 to 100,
which represent the percentage of full motor speed, not the actual RPM.
Wiring
OUT / To DC motor +/-
OUT / To DC motor +/-
IN / Power supply GND
IN / Power supply 10VDC – 55VDC
Features
Ask a question
PWM DC Speed Controller
PWM controller for DC motors, HHO generators, LED dimmer and other where PWM modulation can be applied. All PWM controllers in this group have LED display except PWM-DCC-20-60,...
