Description
DETAILS
- Voltage: 220-240V 50Hz
- Power: 75W
- H.Max: 2.5m
- Flow: 2500 l/h
These submersible pumps are designed for reliability and ultra-quiet operation to provide years of service. Anti-corrosive, acid-resisting and durable.They are great for fresh/salt water aquarium, fountains, spout and hydroponic systems.
- Completely submersible pump.
- Extremely quiet operation.
- High flow rate
- Suction cups to fit any aquariums or reservoir
- Long lasting wear proof ceramic shaft.
- Suitable for fresh and salt water aquarium.
- Saving Power and durable.
- Safety and corrosion preventive
NOTE
DO NOT connect to any voltage other than that shown on the pump
DO NOT pump flammable liquids
If the pump fails to operate , make sure that the power socket is properly connected .
It is advisable that the power socket of the pump is at a higher level to ensure that water does not back flow via the wire to the socket outlet.
CAUTION
Always disconnect from the electrical socket before handing or maintenance.
Do not lift the pump unit with the wire( power code) and do not operate out of the water.
CLEANING
Remove the front cover and impeller cover.
Carefully remove the impeller unit and clean the cylinder with a small brush or under running water.
NOTICE
| This water pump is delivered with a Chinese standard electric plug. It is recommended that you replace it with a standard one or use an adapter. If the pump is used for industrial use, it is easy to remove the plug and install the industrial plug or continue the cable with a waterproof cable clamp. |  |
Do not attempt to wire your water pump on your own or without consult and assistance with a professional electrician before!